ClifTek Support Forums
Aircraft Cabin Parts suppliers - Printable Version

+- ClifTek Support Forums (http://support.cliftek.com)
+-- Forum: AI Toolkit (http://support.cliftek.com/forumdisplay.php?fid=3)
+--- Forum: Steering Behaviours (http://support.cliftek.com/forumdisplay.php?fid=4)
+--- Thread: Aircraft Cabin Parts suppliers (/showthread.php?tid=1983)



Aircraft Cabin Parts suppliers - astao309 - 07-15-2020

Numerical control precision has important influence on machining quality. It should be noted that machining precision and machine tool precision are two different concepts. The rigidity of machine tool directly affects the productivity and machining accuracy. The machining speed of the machining center is much higher than that of the common machine tool, and the motor power is also higher than that of the common machine tool of the same specification. Therefore, the rigidity of its structural design is much higher than that of the common machine tool.
CNC machining center or carving milling machine is good?
One, CNC machining center or carving milling machine is good?
CNC machining center and engraving and milling machine are more commonly used mechanical equipment, there are similarities and differences between the two, if you insist that CNC machining center or engraving and milling good is very difficult to have an accurate answer. There is no way to compare the different USES. There are only small ways to compare the two.
Two, rigid CNC machining center or carving milling machine is good
CNC machining center non - moving part of the rigid requirements are very good, moving part of the rigid is also very good, heavy cutting. And engraving and milling machine non-moving part of the rigid good, moving part due to engraving and milling machine requirements more flexible, so this part of the rigid than CNC machining center to be poor.
Three, spindle speed is CNC machining center or carving milling machine is fast
CNC machining center spindle speed requirements generally in 0-8000rpm, although the high-speed machining center can achieve a high speed, but on the whole or carving milling machine on the speed requirements are higher, carving milling machine requires high-speed CNC system, the spindle speed is generally in 3000-30000rpm, some specific carving milling machine spindle speed is higher than the high-speed machining center.
Four, CNC machining center and engraving and milling machine processing range is different
CNC machining center for the completion of large amount of milling equipment processing, heavy cutting can be carried out. And engraving and milling machine is generally used for small amount of cutting or soft metal processing equipment, the common is used for lettering.
In general, if the hard compared, is not divided into high and low, such as in the heavy cutting can not be carved milling machine, in the fine lettering processing center is useless, can only say that both have their own characteristics and the role of the field, can not be compared strongly.Aircraft Cabin Parts suppliers
website:http://www.szjmaerospace.com/aircraft-cabin-parts/