Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Customized Drawer Rack
#1
Mould tool racking, also known as the mold shelf and The drawer rack, is mainly used to store various mold items; the top can be equipped with a mobile hoist car (hand pull or electric), the bottom of the drawer is equipped with a roller track, which can be pulled freely with a small force after bearing, and the additional positioning insurance device is safe and reliable; according to the bearing capacity, it can be divided into two types: light weight type and weight type. The difference between the drawer shelf and other shelves is that its structure is very simple, and it is composed of many different parts. It is very convenient to install and disassemble, and its floor area is very small, which effectively saves space.
The mold shelf is composed of column and pull rod, the guide groove is installed on the column, the upper and lower parts are connected and fixed by cross beam, then the drawer plate is installed in the guide groove, the limit pin and guide rail are installed, and finally the top plate is laid. There are four kinds of surface treatment schemes commonly used for die shelf: spray painting, powder coating, hot galvanizing and cold galvanizing. Hot dip galvanizing is the most effective anti rust method at present, of course, the cost is also very high, not accepted by the majority of consumers; the most widely used is spray painting and powder coating.

Structural features:
(1) Additional positioning safety device, safe and reliable use;
(2) Easy to operate: it adopts bearing combination, sliding translation and attached with independent lifting device, without large crane and forklift;
(3) Simple structure: it is assembled by a variety of combined parts, convenient for disassembly, transportation and installation;
(4) The crown block can move left and right;
(5) Adjustable height of laminate;
(6) The bearing range of crown block and laminate is 300 to 1300kg or more;
(7) The length of die holder can be connected at will;
We are a manufacturer specializing in the production of racks and shelves. If you are interested in our products, please contact us. According to the needs of users to undertake different load-bearing specifications of different mold frame. The color could be customized.Customized Drawer Rack
website:http://www.keenracking.com/warehouse-rack/drawer-rack/
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)